With the large-scale development of the scrap steel processing industry, gantry shearing machines are widely used in rolling mills, scrap steel processing and recycling units for the recycling of heavy scrap steel. Gantry shearing machines, also known as large hydraulic shears and scrap metal shearing machines, are equipment suitable for heavy-duty scrap steel cutting processing. The gantry shears produced by KAMO MACHINERY are conventional models with a tonnage of 200-1800 tons. The width of the mouth is 600-2000mm, suitable for light and thin steel materials, steel bars, steel plates, nickel plates, round steel, steel pipes, scrap steel, scrap iron, scrap copper, light metal structural parts, stainless steel, automobile body, aluminum alloy, copper, Crushing processing of heavy waste and winding materials that cannot be processed by scrap metal crushing equipment such as iron filings, steel wires, and metal briquettes.
The working principle of the gantry shearing machine: the gantry shear is composed of a frame, a hydraulic cylinder, a hydraulic power system and an electrical system. It passes through the automatic feeding box, that is, after the material is grabbed to the feeding box, the waste is automatically sent to the feeding box. At the cutting edge of the knife, the feeding speed can be adjusted by the speed regulating motor. Side squeeze cylinders are installed on both sides of the material box. Large waste materials such as scrapped cars cannot be cut through the gantry shear. The waste can be squeezed and reduced by the side squeeze cylinders, and then sent to the cutting blade through the conveyor belt for cutting.
The gantry shearing machine is named "gantry" because its cutting blade is an open cutting blade like the gantry of a carp leaping over the dragon gate. It is suitable for all kinds of plate processing and cutting, and reduces the processing cost. Due to the use of a new hydraulic control system and an enhanced oil cylinder, the gantry shearing machine has a working efficiency of 3-6 times/min, successfully solving the problem of crushing and regenerating large-scale heavy waste furnace materials.
After understanding the gantry shearing machine, customers are more concerned about the price. The price of gantry shearing machines basically ranges from hundreds of thousands to hundreds of thousands, and there are many decisive factors in the middle.
1.If the price of gantry shearing machines is lower than the average price of the industry, then customers should be alert. Too low price does not mean low profit, but low cost, and low cost will directly affect the life and use effect of the machine, and even the enterprise does not invest too much in after-sales and R&D. Generally, customers don’t know much about the professional technology of the machine. Once they buy cheap and inferior products, they will lose more than the gains, and they will have to buy again. Not only is money wasted, but production is also delayed.
2.After understanding the specifications of the machine with the manufacturer and determining the model suitable for your use, go to bargain. When buying a gantry shearing machine, the price is important, but the equipment suitable for your site and model is more important. Customers buy equipment to create wealth, not to buy furnishings. High-quality manufacturers, excellent equipment, and perfect after-sales services are all information that needs to be understood in detail when consulting the price in order to avoid worries.
3.The customer selected a gantry shearing machine with a suitable model from a high-quality manufacturer in all aspects, and it is catching up with the manufacturer's activities. The price is the best, and the most satisfactory equipment can be bought with the least amount of money.
