As the saying goes: rubbish is just misplaced wealth. In our lives, how to deal with used scrap paint buckets? How to reuse the used paint barrels? It can turn waste into treasure and reduce environmental pollution. Here are two methods of crushing and processing large paint buckets into particles.

1. Measure the diameter of a large waste paint bucket. TONTLI SHREDDER is a manufacturer specializing in the production of scrap metal processing equipment, with a complete range of models, and you can choose the appropriate model according to the diameter of the feed port of the metal crusher. A paint bucket crusher and auxiliary equipment can form a production line.

The paint bucket crushing and sorting line is composed of three parts: conveying system, crushing system and magnetic separation system. The paint bucket crusher uses the basic principle of the motor to drive the wind wheel to squeeze. Driven by the high-speed and high-torque motor, the crushed material can be sufficiently and effectively crushed in the crushing chamber, and the material to be crushed is torn into the crushed material that meets the specifications. . After the material enters the crushing chamber, the garbage in the paint bucket is sorted by air selection during the crushing process. The chemical composition of the material after the paint bucket crusher is stable, the crushed material is clean and beautiful, and there is no debris. It is of high quality steelmaking. raw material.

The range of crush materials: paint drums, gasoline drums, cans, etc., metal materials smaller than the measured diameter can be used. The materials crushed by the paint bucket crusher are flakes, granules, and walnuts, which can be adjusted according to customer requirements.

2. Metal shredder + small metal crusher + auxiliary equipment. The paint bucket is first put into the metal shredder, shredded into strips, and then put into the small metal shredder to be broken into flakes, granules or walnuts as required by the customer.

The metal shredder is an environmentally friendly and energy-saving equipment with the design concept of energy saving, consumption reduction and emission reduction. It is also a necessary equipment for the pre-treatment of metal recycling in the early stage. The knives are made of imported materials from Europe, which are durable and can shred metals well. The overall structure is compact, low speed, high torque, low vibration, low noise, and meets environmental protection requirements. After the scrap metal is shredded, the metal material is discharged through the equipment screen, and the discharge size is determined by the screen aperture. When the qualified size material meets the specified requirements, it will flow out along the screen, and the unqualified material will be shredded again in the machine cavity until the size is qualified and discharged.

After the large paint bucket is processed by the metal shredder, it has become a long strip, and a small metal shredder is enough. The working principle of the metal crusher has been discussed above, so I will not repeat the introduction.

The above two methods are aimed at customers who have a large number of waste paint buckets. They can find a qualified manufacturer and purchase paint bucket treatment equipment that meets environmental protection standards. If the customer only has a small amount of waste paint buckets, they can be made into daily benches, planted with flowers and plants after cleaning the DIY design, or sold to metal recycling stations.