In daily work and life, the use of rotors is very large, and the industries involved are also very wide, so a large amount of waste rotors, stators and other scrap metals are generated. Recycling and processing will be a big project. The rotor is the rotating part of the motor, and the rotating body supported by the bearing is generally composed of a coiled iron core, a slip ring, and a fan blade. Waste rotors are divided into copper rotors and aluminum rotors. In order to maximize the benefits of resource recovery, various metal materials must be separated. The video below is an aluminum rotor crushing and sorting equipment.

The scrap aluminum rotor crushing and sorting line is composed of a feeder, a metal crusher, a discharge conveyor, a magnetic separation, and a finished product conveyor. This rotor crushing production line adopts physical methods of harmless treatment. The materials such as waste aluminum rotors that are manually pre-sorted are transported to the metal crusher for crushing through the feeder, and then the iron is separated through the magnetic roller. Aluminium is stacked together via a finished product conveyor. The multiple crushing functions of the metal crusher solve the problem of motor rotor crushing well. The crushed motor rotor can realize the perfect separation of the fixed frame, the main shaft and the enameled wire. After the subsequent supporting sorting equipment, it will significantly improve the waste rotor crushing and aluminum selection. Effect.

The waste rotor has a compact structure and high hardness. It is difficult to achieve the desired effect with ordinary crushers. If the manual dismantling speed is slow and the efficiency is low, the waste rotor crusher of TONGLI SHREDDER is optimized on the basis of the scrap steel crusher. A new type of rotor crushing equipment designed, which can crush waste aluminum rotors of motors, ceiling fan rings, small motors, air conditioner rotors, compressor rotors, washing machine rotors and small compacts of light and thin materials, etc. It has strong treatment for waste rotor crushing. ability.

The waste rotor crusher is firstly crushed and then screened layer by layer, and the effect of separating aluminum and iron is very good. The motor rotor crusher is actually a small equipment for crushing scrap metal, and it can be crushed in a wide range of types. The entire production line equipment runs stably, is safe to use, realizes automatic crushing, machine separation, high efficiency, fast speed, low cost, and can work continuously. One worker is responsible for feeding materials to complete the continuous treatment of waste rotors, which is very economical and applicable.

Among the renewable resources, there is no such thing as "waste". The so-called waste motor rotor is just "silver" that is misplaced. With the continuous improvement of the global awareness of resource reuse, it is indeed a good development direction to be unique, analyze the potential value of waste, find recycling sources according to the value orientation, and finally carry out classification and recycling. The waste rotor crusher produced by TONGLI SHREDDER is automatically crushed and separated, which fully conforms to the development trend of the contemporary recycling industry, and solves the problems of slow dismantling of waste rotors, difficult labor, and low efficiency. In addition, our factory also produces a variety of large, medium and small scrap shredders, scrap aluminum shredders, metal shredders, copper rice machines, metal shears, metal balers and other waste processing equipment, no matter what kind of scrap the customer needs to shred Material, TONGLI always has a suitable for you, welcome to contact us!